Thanks to the contemporaneity of the cut made vertically and horizontally, and specially thanks to the use two or three vertical blades and two horizontal blades (one that cut under, and another that level. In this way you can obtain the same size of blocks in all part with the same height) the quarried blocks are perfectly squared and sharp corners, in order to be employed directly, without any change. It is possible also extract directly on the quarry some very thin slabs perfectly smooth and squared able to employed directly for the creation of coverings for external use or floors without doing any new productive passages with a high decrease of productive costs.
Is possible have of this machine two version:
- SQUARE version with two or three vertical blades and to horizontal blades
- NORMAL version with one vertical blade and one horizontal blade.
The cutting of the stone is a dry-cut, thanks to steel circular blades, which assemble along their teeth, same special Widia steel points eerily replaceable when used up.
The machine is supplied with electric safety devices which make it in conformity witch CE main points in force.
It’s very easy to use the machine and it’s also so easy to drive, that a worker is able to employ it at best after having a try of few hours.
Technical features Combined machine
Model | Total Power | Vertical Disk Power | Horizontal Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.C.T.M. 2 | 66 | 30 | 30 | 3 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | Optional | Normal T 45 mm | 2.000 | NO |
Besides the INDUSTRIE D'AMICO has the possibility to personalize the machine building the same on the demands of the clients. On each model we have the possibility to change the technical features as for instance the depths of cut, or build machines out of the standard as for instance 2 meters blades, motor of different powers or the use of diamond disks for the cut of very hard stones.
Besides the INDUSTRIE D'AMICO has the possibility to personalize the machine building the same on the demands of the clients. On each model we have the possibility to change the technical features as for instance the depths of cut, or build machines out of the standard as for instance 2 meters blades, motor of different powers or the use of diamond disks for the cut of very hard stones.